DRBD, heartbeat on Debian Etch: Difference between revisions
Jump to navigation
Jump to search
Line 65: | Line 65: | ||
initdead 60 |
initdead 60 |
||
udpport 694 |
udpport 694 |
||
ucast eth0 192.168.0.140 |
|||
baud 19200 |
|||
serial /dev/ttyS0 |
|||
ucast eth0 192.168.0.140 (slave node should have master ip here; 192.168.0.110) |
|||
auto_failback off |
auto_failback off |
||
⚫ | |||
watchdog /dev/watchdog |
|||
node |
node server2 |
||
⚫ | |||
</pre> |
</pre> |
||
Revision as of 23:18, 11 December 2008
DRBD & Heartbeat on Debian Etch
Install DRBD
Unfortunately, drbd is not actively available as a package under Debian Etch, so it has to be build from source.
Luckily this can be done automatically with debian.
apt-get install module-assistant build-essential drbd0.7-module-source ## Then build the module m-a a-i drbd0.7
Setup some basic drbd replication [internal meta - partition]
resource drbd { protocol C; incon-degr-cmd "killall heartbeat"; disk { on-io-error panic; } syncer { rate 10M; # Note: 'M' is MegaBytes, not MegaBits } on server1 { device /dev/drbd0; disk /dev/hdc3; address 192.168.0.110:7789; meta-disk internal; } on server2 { device /dev/drbd0; disk /dev/hda3; address 192.168.0.140:7789; meta-disk internal; } }
Of course adjust to your need.
Install heartbeat
apt-get install heartbeat
Setup heartbeat (basic)
Edit both host files ( /etc/ha.d/authkeys )
auth 2 1 crc 2 sha1 ThisIsASampleKeyAnythingAlphaNumericIsGoodHere 3 md5 ThisIsASampleKeyAnythingAlphaNumericIsGoodHere
Edit HA for master node ( /etc/ha.d/ha.cf )
keepalive 1 deadtime 10 warntime 5 initdead 60 udpport 694 ucast eth0 192.168.0.140 auto_failback off node server1 node server2
Update systemfiles
Add needed servers to hosts file
[ ... ] 192.168.0.110 server1 192.168.0.140 server2 192.168.0.180 server [ ... ]
chmod /etc/ha.d/authkeys files
chmod 0600 /etc/ha.d/authkeys
Prepare new drbd partition for data
mkfs.ext3 /dev/drbd0
Setup exim
dpkg-reconfigure exim4-config
Install services
## Apache + php5 + mysql apt-get install apache2 php5 php5-mysql mysql-server ## pureftpd apt-get install pure-ftpd
- Heartbeat controlled ressources #########
Stop services and let heartbeat handle it:
/etc/init.d/apache2 stop /etc/init.d/mysql stop ## Copy to cp -p /etc/init.d/mysql /etc/ha.d/resource.d/ cp -p /etc/init.d/apache2 /etc/ha.d/resource.d/ ## Remove old init-scripts for mysql/apache update-rc.d -f apache2 remove update-rc.d -f mysql remove ## Config to use the new storage (/data)